www.victorruoshui.co.kr
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부
또는 일부를 이용하려면, 반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
- 13 -
2. The initiate state of the meter is in
automatic range status, which shows
"AUTO" symbol;
3. Make the test leads contacted to the testing
point. The voltage and polarity of the
point where the red test lead is contacted
will be displayed on the screen.
Caution
:
1. Don't measure voltage over 600V.
Otherwise, there is a danger of meter
being damaged.
2. When measuring high voltage, special
attention should be given to personal
safety and avoid your body getting in
touch with high voltage circuit.
Range
Accuracy Resolution
400mV
±(0.5%+4d)
100uV
4V
1mV
