3. Disconnect the power cord from the
electrical source before servicing the
tool.
Only authorized personnel should
perform maintenance on the tool . Always
disconnect the power cord from the
electrical source before servicing or
adjusting the tool .
4. Do not operate the tool in gaseous or
explosive environments.
The tool motor
produces a normal spark, which could
ignite fumes .
WARNING
1. Prevent back injury.
Always use proper
lifting techniques when handling tool
components .
2. Wear proper apparel.
Do not wear loose
clothing, gloves, jewelry, or anything that
can become entangled in moving parts .
3. Wear protective items when working with
tools.
Always wear safety glasses, hardhat,
foot protection, and hearing protection . A
face or dust mask is recommended, since
the cutting operation produces fine metal
particles .
4. Keep hands and tools away from the arbor
assembly during the cutting operation.
Ensure that adjustment keys and wrenches
are removed from the tool before operation .
5. Do not reach inside pipe/tubing ends
during tool operation.
Pipe edges can
be sharp and can snag hands and shirt
sleeves .
6. Prevent accidental startups.
Do not carry
the tool with the trigger depressed .
7. Do not over-reach.
Maintain proper
balance at all times .
8. Do not make any modifications to the
tool.
Do not remove any safety guarding
or any components that affect tool
performance .
9. Do not abuse the power cord.
Never carry
the tool by the power cord or yank the cord
out of a receptacle . Keep the cord away
from heat, oil, and sharp objects .
CAUTION
1. The HCT908 tool is designed ONLY for
grooving pipe/tubing sizes, materials, and
wall thicknesses as designated.
2. Inspect the equipment.
Before using
the tool, check moveable parts for
obstructions . Ensure that tool components
are installed and adjusted in accordance
with setup instructions .
3. Stay alert.
Do not operate the tool if you
are drowsy from medication or fatigue .
4. Keep visitors, trainees, and observers
away from the immediate work area.
All
visitors should be kept a safe distance from
the equipment at all times . When using this
tool on an elevated floor, the area below
must remain clear of other personnel .
5. Keep work area clean.
Keep the work area
around the tool clear of any obstructions
that could limit movement of the operator .
Clean up any spills .
6. Secure the tool and accessories.
Verify
that the tool is stable . Refer to the “Tool
Setup” section .
7. Support the work.
Use clamps or a vise to
hold work securely .
8. Do not force the tool.
Do not force the tool
or accessories to perform any functions
beyond the capabilities described in these
instructions . Do not overload the tool .
9. Maintain tool with care.
Keep the tool clean
to ensure proper and safe performance .
Follow the instructions for lubricating tool
components and changing accessories .
10. Use only Victaulic replacement parts
and accessories
. Use of any other parts
may result in a voided warranty, improper
operation, and hazardous situations . Refer
to the “Parts Ordering Information” and
“Accessories” sections .
11. Do not remove any labels from the tool.
Replace any damaged or worn labels .
5
REV_C
TM-HCT908
/ Operating and Maintenance Instructions Manual
Содержание TM-HCT908
Страница 2: ......
