background image

12  

••

 Maintenance 

XX123-00-02 Rev 203 Network Interface 

j. 

Help: On-screen guide to GUI functions. 

 

 

 

k.  Double Click: Simulates a simultaneous key click required for some AurorAcorD functions. 

Preset Button 

The PRESET button is located on the rear panel of the unit. Refer to Figure 1. The button is recessed to protect 
it from being accidentally pushed. The button is accessed by using a small pointed object, such as small 
screwdriver or the end of a paper clip. Pressing the PRESET button for 10 seconds returns the AURC-NIU to the 
factory default condition.  

• 

Resets Video Setup to NTSC, 640 x 240, normal. 

• 

Clears all the user accounts and passwords; user reverts to “admin” and password reverts “vicon”  

 
It is important to note that a result of using the PRESET button is that 

the next time

 (no matter how long after 

the action) the unit is powered down and then powered up after pressing the PRESET button; the IP address for 
the AURC-NIU will revert to the factory default and must be reprogrammed to match your unique network setting. 
 

Maintenance 

The AURC-NIU requires no maintenance. Remember that recording will stop when the PC has reached full 
capacity of disk storage space. To prevent the possibility of not recording important data, check disk space and 
delete any unnecessary files. Usually it is recommended to delete oldest files first. 

Содержание XX123-00-02



























Отзывы: