27
ٻ
2. Basic operation procedures
2.1
Power
On/Off
2.1.1 Power
ON
Using either the keypad or the remote control, press the “POWER” button. (Note: In case
of power outage or rare instance of system failure, the DVR will reboot automatically)
The Power LED light will turn from red to green when it has turned on properly.
In a standby mode, the LED is red.
2.1.2 Power
OFF
In order to shutdown the system, you must type in the password. The default password for
shutdown is “111111”.
2.2
Date & time setting
Set the date and time for the DVR.
(
System Setup in Main Menu
Æ
Time/Date
)
2.3
Change of live video channel in Multi channel screen
Live channel can be changed in Multi channel screen of DVR.
This function is available for 4 ch / 6 ch / 8 ch / 9 ch of multi channel screen. It’s not available
for 16 ch. If OK key is pressed in the multi channel screen, box appears. Buttons are used to
select the channel.
And up/down key is used to move the channel.
After setting, if menu key is pressed, user can go back to Live picture.
2.4
Password setting procedure
Change your password for the DVR. The password must be a 6-digit combined number
consisting of numbers 1 ~ 8.
(
System Setup in Main Menu
Æ
System Password
)
