![Vicon VDR-304 Скачать руководство пользователя страница 116](http://html1.mh-extra.com/html/vicon/vdr-304/vdr-304_installation-and-operation-manual_1012827116.webp)
115
ٻ
z
z
z
z
z
z
You should do HDD JUMPER setting before or after HDD & BRACKET. This setting
methods are different according to HDD manufacturer.
z
Generally you can find some setting information on the top of HDD , you can follows
those instructions.
z
In case of one HDD installation, set HDD to ‘MASTER’ or ‘SINGLE’ .
z
In case of two HDD, one HDD set to ‘MASTER’, the other HDD set to ‘SLAVE’.
z
z
z
If you finish the installation of HDD& BRACKET, Put those finished HDD into DVR.
z
You can do it as above drawing. Pay attention to the direction of HDD connector.
z
Be careful of front panel cable might be stuck in HDD set and DVR.
z
Volts can be used same ones when you disassembled.