66
ٻ
3.7.7.1 Active
Set up Active state. Low/High will be different depend on machine.
3.7.7.2 Function
The following list contains a brief description of each function.
3.7.7.2.1
Direction : IN
z
UNUSED:
Do not use the AUX port.
z
ALARM RESET IN:
Pause alarm or buzzer when event occurred
z
RECORD START IN:
Record is on while external signal comes in.
z
RECORD ON/OFF:
Recording start/stop during user push the button & same as
pushing remote controller or DVR machine
3.7.7.2.2
Direction : OUT
z
ALRAM OUT:
Notice the assigned port when event occurred
z
ERROR OUT:
Notice the assigned port when system error occurred
(Mark
system
error)
z
RECORD START OUT:
HDD of DVR is full(100%), send signal to DVR
which is connect with AUX port. During receiving recording
signal through AUX port, it can record it and the mode of DVR
AUX in port is RECORD
z
DISK FULL:
If HDD is full, send signal to the AUX port.
z
RECORD STATUS:
Indicate whether it is recording or not
3.7.8 Factory
Default
All of set-up date of system comes back to Factory default.
Confirmation box on picture setting default will appear after entering default. User can
restore the factory default setting after entering “YES” key button.
Please refer to paragraph 5.3 for factory default.
