7
may cause congestion. Although there is a maximum of 10 unicast viewers, note that all
multicast users combined count as 1 unicast viewer.
RTP/RTSP
This unicast method is RTP tunneled over RTSP. This could be used to exploit the fact that it
is relatively simple to configure firewalls to allow RTSP traffic.
4. Setup
The V992-N is configured from the Setup link, which is available on the top left hand side in
the web interface. This configuration could be done by:
•
Administrators
, who have unrestricted access to all settings under the Setup tab.
Accessing the Setup link from a browser
1. Start your web browser and enter the IP address or host name of the camera into the
address bar.
2. The Live View page is now displayed. Click on the Setup tap.
4.1 Install
