2
2. Installation
2.1 Install camera
1) Assemble the mounting tripod (supplied), used
when mounting the camera to a wall bracket,
onto camera with supplied screws.
2) Install the wall bracket at the installation
location according to the instructions supplied
with the wall bracket.
3) Install the camera onto the wall bracket.
2.2 Assign IP address
The default setting of the camera is set “DHCP” to ON. If you have a DHCP server on your
network and UPnP function enabled on your PC you can find the network camera in “My
network”.
If a DHCP server is not available on your network, assign IP address by the following process:
Execute Multi-Upgrade Tool (from the Installation CD). It will search cameras on the network
automatically.
1) After the list of detected devices appears, select the camera you are trying to configure.
2) Select the Network type as Static or DHCP. If Static is selected, enter all of the network
information for your camera.
