4
When you first access the camera you will be asked to download and install an Active X
control from the camera to display a Live image.
NOTE:
The layout of the live view page in the camera may have been customized to meet
specific requirements. Consequently, some of the examples and functions featured
here may differ from those displayed on your own Live View page.
2.4 Accessing the camera from the Internet
Once installed, the camera is accessible on the local network (LAN). Configure the
router/firewall to allow incoming data traffic to access the camera from the Internet. For
security reasons this is usually done on a specific port. Please refer to the documentation
for router/firewall for further instructions.
2.5 Adjusting the Image and Focus
With Analog Video output
1. Open the
Live View
page in your web browser.
- Select the
Setup
tab, and open the
Installation
page.
- Select the ‘Video Format'.
2. Connect analog monitor to the VIDEO OUT (BNC) on the cable.
- Adjust camera angle.
