VICON
INSTRUCTIONS FOR
INSTALLATION AND OPERATION
MODEL
MAXIMUM SECURITY HOUSING
INTRODUCTION
The
in this
manual covers the
installation, operation, and maintenance of Model
Maximum Security Housing.
This
should be installed only by a qualified techni-
cian using approved
and wiring practices in
accordance with national, state, and local electrical
codes.
to comply with these instructions may
result in personal injury and/or damage to the equip-
ment.
The
Maximum Security Housing provides a
tamper-resistant means of concealing a
camera
and is intended for use in high-risk areas where surveil-
lance equipment is vulnerable to physical or criminal
violence. It is designed to be conveniently comer
mounted. The housing accommodates small solid-state
cameras with fixed-focal-length lenses and offers easy
accessibility for camera and lens adjustment.
A hinged cover with a specially-keyed doubleacting
lock provides an uncomplicated but secure locking sys-
tem. The housing is constructed of welded
steel, and the window is impact-resistant
mak-
ing it virtually impenetrable. The exterior surface is
painted cast-iron gray.
Provision is made for routing electrical connections,
including AC power lines and video cables, into the
housing.
are four holes for
(1.27 cm)
conduit in the back of the housing. Since the cables pass
directly into the wall, they are not exposed at any point
to vandalism.
2. INSTALLATION
WARNING: Read ALL instructions
A
before installing this unit. Failure to
do so may result in costly installation mistakes
or personal injury to the
other
sons.
In order to open the enclosure for installation, use the
hesagonal Allen wrench supplied with the housing in
conjunction with the key. Turn the key lock to the open
position. Insert the Allen wrench in the opening on the
side of the housing base.
it against the spring
tension of the internal latches.
unit may now be
opened. Refer to Figure 1.
WARNING: TO PREVENT RISK OF
OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
part number
VICON INDUSTRIES INC. 525 BROAD HOLLOW ROAD, MELVILLE, N.Y. 11747 TEL:
FAX: 516-293-2627
TOLL FREE:
(OUTSIDE OF NEW YORK)
