35
–
Max. shutter:
Users can set the limit for slow shutter speeds used in dark environments.
–
Min. shutter:
Users can set the limit for fast shutter speeds used in bright environments.
•
Image Appearance
This provides access to the advanced image settings for the network camera.
–
Brightness:
The image brightness can be adjusted in the range 1-10, where a higher
value produces a brighter image.
–
Contrast:
Adjust the
image’s contrast by raising or lowering the value in this field.
–
Saturation:
Set an appropriate value in the range 1-10. Lower values mean less color
saturation.
–
Hue:
Set an appropriate value in the range 1-10. The value distinguishes color, such as
red, yellow, green, or violet.
–
Sharpness:
Set the amount of sharpening applied to the image. A sharper image might
increase image noise, especially in low light conditions. A lower setting reduces image
noise, but the image would be less sharp.
–
White Balance Mode:
Select white balance mode that fits camera installation environment.
If Manual mode is selected, user can set R, G, B gain manually.
•
Enhance Control
– Enable wide dynamic range:
Activates WDR, which cannot be used with Defog
function. If WDR is activated, Shutter mode becomes automatic only.
–
Enable flip horizontally:
Check this box to flip the image.
–
Enable mirror image:
Check this box to mirror the image.
–
Enable noise reduction:
Check this box to activate the noise reduction.
Once enabled, you can select noise reduction level.
Содержание V8360W Series
Страница 94: ...Rev A ...
