Setup menu 17
7-5. COMMUNICATION (OPTION)
This sets up communication using the RS-485 format.
Protocol
- RS-485 protocol (PELCO-D).
Address
- Select the camera ID (001 - 255).
Baud Rate
- Select serial communication speed.
(2400/4800/9600/19200/38400/57600/115200).
Databit
– Internally fixed.
Parity
– Select OFF/ODD/EVEN. This is used to find the Bit to extract an error on the
keyboard.
Stopbit
– Internally fixed.
Key of Keyboard Controller:
MENU
Joystick Handle turn clockwise , ZOOMTELE
ENTER
Joystick Handle turn clockwise, IRIS CLOSE
OSD Cursor Movement
Joystick Up / Down / Left / Right
7-6. CAMERA ID
Set the camera ID ON or OFF. When ON, the CAMERA ID SETUP screen can be displayed.
A title of 64 characters per line can be
configured.
Use the joystick to navigate the cursor.
Pushing centrally on the joystick will allow
selection of that character.
The arrows at the bottom allow you to move
the cursor without changing the character.
CHR1
Select CHR1 is displayed Table of input Characters.
CHR2
Select CHR2 is displayed Table of input White Bar.
CLR
Select CLR to insert a space.
POS
Select POS to return to the live view screen to adjust the location of the
camera ID title display. (If it is moved too much to the right side or down,
the ID might move off the screen.)
8. EXIT-MENU
SAVE
Save the settings (settings are saved).
NOT SAVE
Exit menu without saving.
CANCEL
Changes (restore settings to those selected when the menu was displayed).
BACK
Return to previous menu.
9. LANGUAGE
Select a language from English, Spanish, Russian, Portuguese, Germa
n, French, or
Japanese.
10. VERSION
Camera version information is displayed.
CAMERA ID SETUP
CAMERA ID
A B C D E F G H I J K L M N O P Q R S T U V
W X Y Z 0 1 2 3 4 5 6 7 8 9 ! ” # $ % & ’(
) _ ` ,
￥
: ; <
= > ? @ \^ *
CHR1 CHR2
CLR POS
RETURN
