16 Setup menu
MASK AREA
This is used for setting the no-detection area.
The active point (MASK AREA 1~96) is displayed. Move from point to point using the
joystick. Press the joystick to select edit point. (no-detection area).
MONITOR AREA
Set the position of the motion detection area. Select the area to be set up and turn area
mode ON> The size of the frame can be adjusted using the Top, Bottom, Left and Right
sliding scales.
7. SYS SETTING
7-1. SYNC MODE
Select how the camera is synchronized with other cameras in the system. External
synchronization (line lock) is a function that synchronizes the phase between an output
video signal and an external reference signal.
INT
Using this mode, timing is controlled by internal electronics in the camera; synchronization is
not implemented with multiple cameras.
LL
In Line Lock mode, LL is used to synchronize the vertical sync signal with the AC power
supply with a power line frequency of 60 Hz (for the NTSC format) or 50 Hz (for the PAL
format). Line Lock is not available when using a 12 VDC power supply. Use line lock
mode to minimize color rolling.
PHASE
– Use the sliding scale to select a value from 0 to 524 (PAL, 624).
7-2. LENS
Set the lens type.
AUTO
When Auto is selected, there are further menu options (Mode, Adjust, Speed).
Manual
Allows manual adjustment of lens. Do not select this option.
7-2-1. MODE
AUTO
Adjusts the iris in accordance with the subject brightness.
OPEN
Fully opens the iris.
CLOSE
Fully closes the iris.
7-2-
2.
ADJUST
When performing the automatic mechanical iris adjustments, a suitable convergence speed
(how fast the lens responds) for the lens is calculated, View a high-brightness subject
which will make the brightness of the whole screen uniform. Check that the scene
conditions are sufficiently bright and stable.
7-2-3. SPEED
Manually sets the convergence speed for how fast the lens responds to lighting changes
(autoiris).
7-3. FLIP
Digital Flip (rotation state) can be selected to be OFF/ V (top/bottom reversal)/H (left/right
reversal)/HV (rotation by 180 degrees).
7-4. LCD / CRT
Select monitor mode of LCD or CRT.
