Vicon V1400X-DVC-3 Скачать руководство пользователя страница 50

Страница: 50 / 67

XX090-02-00 Rev 1102 System Console

Operation: Multiplexers & Digital Recorders

•

Recording Video

Note: This section is only relevant for simplex models. Duplex models record continuously.

To record video (AurorA99 multiplexers):

1. Press the Mode soft key. The Mode key and the Format key share a label. Press the Shift ( ) key to

toggle to the Mode label if necessary.

2. The Mode Select menu will display on the multipicture display monitor.

3. Use the joystick or press the “3” key to select “Encode <VCR Rec>”. Press the Enter soft key.

4. Press and hold the Shift ( ) key and then press the F4 key. The VCR Control screen will display on the

system console.

5. Enter the unit number for the VCR connected to the AurorA99/AurorA on which you initiated recording

(applicable only for multi-VCR systems) and press the Unit soft key.

6. Press the Record soft key on the VCR Control screen.

7. Press and hold the Shift ( ) key and then press F3 to return to the AurorA screen. Press the Monitor key

to exit the AurorA99/AurorA menus.

To record video (AurorA2000 and AurorAcorD):

1. Press the Record soft key.

2. Press and hold the Shift ( ) key and then press the F4 key. The VCR Control screen will display on the

system console.

3. Enter the unit number for the VCR connected to the multiplexer on which you initiated recording

(applicable only for multi-VCR systems) and press the Unit soft key.

4. Press the Record soft key on the VCR Control screen.

5. Press and hold the Shift ( ) key and then press F3 to return to the AurorA screen.

Playing Back Video

To play back video (AurorA99 multiplexers):

1. Press the Mode soft key. The Mode key and the Format key share a label. Press the Shift ( ) key to

toggle to the Mode label if necessary.

2. The Mode Select menu will display on the multipicture display monitor.

3. Use the joystick or press the “2” key to select “Decode <VCR Play>”.

4. Press the Enter soft key.

5. Press and hold the Shift ( ) key and then press the F4 key. The VCR Control screen will display on the

system console.

6. Enter the unit number for the VCR connected to the AurorA99/AurorA on which you initiated recording

(applicable only for multi-VCR systems) and press the Unit soft key.

7. Rewind the tape if necessary and press the Play soft key on the VCR Control screen.

Содержание V1400X-DVC-3




































































Результаты поиска

Содержание V1400X-DVC-3

Отзывы:

Похожие инструкции для V1400X-DVC-3

Бренды по названию

Популярные бренды

Vicon V1400X-DVC-3, Инструкция по эксплуатации

Результаты поиска

Содержание V1400X-DVC-3

Отзывы:

Похожие инструкции для V1400X-DVC-3

Бренды по названию

Популярные бренды