26
•
System Settings
XX090-02-00 Rev 1102 System Console
Defining the Mode
Standalone
As standalone systems do not include Aurora99/AurorA multiplexers, VCR or NOVA control systems, the last
four selections on the Select System Category screen do not apply. Choose the Exit soft key.
NOVA/AURORA/VCR
After selecting NOVA/AURORA/VCR as the mode as discussed in the previous section, the Select System
Category screen will be onscreen. Perform the following procedure, starting from the Select System Category
screen.
1. Select NOVA Configuration and press Enter.
2. Choose the correct series: 1300 Series or 1400 Series. The 1300 Series includes the V1300 and V1344.
The 1400 Series currently includes the V1466, V1444, V1422 (VPS328) and V1400. Press Enter.
3. Press
Exit.
Use the arrow keys to change selection
followed by the ENTER key or press EXIT
to return to the previous screen.
Select NOVA System
NOT USED
1300 SERIES
1400 SERIES
1
E
X
I
T
E
N
T
E
R
MSS/NOVA/AURORA/VCR
After selecting MSS/NOVA/AURORA/VCR as the mode as discussed in the previous section, the Select
System Category screen will be onscreen. Perform the following procedure, starting from the Select System
Category screen.
1. Select NOVA Configuration and press Enter. The following screen will display.
NOVA System Configuration
SYSTEM NOVA UNIT
Pg 1 of 2
YES
NO
1
2
3
4
5
6
7
8
Is this configuration correct?
1400 Series
1300 Series
NOT USED
NOT USED
NOT USED
NOT USED
NOT USED
NOT USED
2. There are two pages for this screen. To examine the second page, use the up arrow soft key at the right
of the screen.
