Vicon SN118C, Руководство по установке

Страница: 5 / 45

1-2
|
Chapter 1 Introduction
XX214-00 Surveyor HD Network Dome
General Information
The information in this manual covers the installation and operation of the
Surveyor® HD Network Dome.
Note
Read all instructions before beginning any installation.
The Surveyor HD is a compact network dome comprised of a camera/lens
and pan/tilt drive in an attractive covert enclosure. Surveyor HD is sold in a
variety of prepackaged configurations with choices in environment, mounting
configuration, and lower dome types. Refer to Table 1 for a complete list of
model numbers. The term Surveyor HD refers to all domes in this series
unless specifically stated otherwise.
The Surveyor HD provides network video transmission using high-profile
H.264 or M-JPEG compression. The dome supports ONVIF open
architecture connectivity to enable integration into third party Video
Management Systems (VMS), including Vicon’s ViconNet.
The Surveyor HD is designed for easy installation and serviceability. The
entire drive assembly simply snaps into the housing. When removed, the
mechanism retains all programmed functions in its on-board memory. The
customer interface board snaps down for easy access and the PCB provides
removable terminal blocks for simple wiring connections. The camera dome
offers variable speed with stepping motors, continuous rotation and preset
positions. Power to the indoor units can be provided by PoE+ (Power over
Ethernet Plus). Additionally, two fiber versions, multi-mode and single-mode,
and a version for NTCIP are available.
The Surveyor HD includes a high-definition 1.3 or 2.0 megapixel day/night
camera with wide dynamic range (WDR) and digital noise reduction
(DNR/FNR). See Technical Information for camera features. Camera image
settings are configured via a user-friendly web browser interface.
All versions use the same firmware for programming and operation. For
programming, refer to the most recent version of Surveyor HD Programming
Manual XX214-40. The Surveyor HD Network Dome is compatible with the
SVFT-UWM and SVFT-WM Wall Mounts, SVFT-UCM Ceiling Mount, SVFT-
IC-KT In-Ceiling Mount, SVFT-UCP Ceiling Panel, SVFT-URM-1 Roof Mount,
and SVFT-UPM-1 Parapet Mount.