Vicon SN118C, Руководство по установке

Страница: 10 / 45

Installation
|
2-3
Surveyor HD Network Dome XX214-00
Accessory Kits
There are different accessory kits included with the different configurations of
Surveyor HD; these kits provide the necessary items for installation as
follows:
Description Quantity
2-position terminal block 1
4-position terminal block 1
8-position terminal block 1
Note
A scribe and a strain relief are included in the in-ceiling unit accessory kit
only. A packet of anti-seize lubricant is included with the outdoor pendant and
high-impact models; the high-impact version also includes a bit that fits the
tamperproof screws.
Refer to the Wiring section of this manual for details on using the supplied
removable termination blocks. The scribe is supplied to accurately measure
the opening for the in-ceiling model. The lubricant is used for sealing and to
prevent galling at the end of the 1.5-inch NPT pipe on the outdoor pendant
model. Refer to the outdoor pendant model sub-section of the Installation
section for details on applying the lubricant.
Unpacking
All Vicon equipment is tested and inspected before leaving the factory. It is
the carrier’s responsibility to provide suitable delivery.
Inspect the cartons upon delivery and, if damage is present, make detailed
notes on the carrier’s bill. Then, obtain the carrier agent’s signature and file a
damage claim as soon as possible.
Open the cartons and inspect the equipment for damage. Save the cartons
and packing material. If damage is present, contact the carrier and file a
damage claim immediately. If the equipment must be returned for repair,
follow the instructions in the Shipping Information section of this manual.
Remove the Accessory Kit and the unit from the box. Open the Accessory Kit
and verify the hardware contained in the kit against the preceding table.