[System Status]
This menu displays the information for this camera.
SYSTEM STATUS
PROTOCOL :
VICON
BAUD RATE
: 4800 BPS
FIRMWARE VER.
: 2.15
UPGRADED DATE
: 10.07.07
CAMERA MODULE
: SDM100
[PREVIOUS PAGE]
DEFAULT SETTING
•
Protocol and baud rate are selected with the DIP switch setting (refer to page 19 and 20.
•
Firmware version and upgraded date will be changed if upgraded.
•
Camera modules can be set as follows:
SDM100: SAMSUNG 10X ZOOM CAMERA MODULE.
[Initialization]
To clear the current settings, select the item (tour, preset, sector, privacy or pattern), moving the joystick to the
right, to return to factory defaults.
INITIALIZATION
[TOUR CLEAR]
[PRESET CLEAR]
[SECTOR CLEAR]
[PRIVACY CLEAR]
[PATTERN CLEAR]
[LOAD OPTIMIZED DEFAULT]
[PREVIOUS PAGE]
To clear saved data, move the joystick to the right for each item.
TOUR CLEAR
ARE YOU SURE? YES NO
TOUR CLEAR
Press the AP button when the cursor is at YES to confirm to clear saved data. The selected item, such as tour,
preset, sector and so on, then flickers on the monitor for about 2~3 seconds. After this process, the menu
returns to the previous page. [PRESET CLEAR], [SECTOR CLEAR], [PRIVACY CLEAR], [PATTERN CLEAR]
are cleared in the same way as [TOUR CLEAR] example shown.
LOAD OPTIMIZED DEFAULT
ARE YOU SURE? YES NO
ALL DATA INITIALIZING
12
•
XX183-01-02 Rev 808 S10-CH Camera Dome System
