Vicon Roughneck V2100B Series, Быстрое руководство

Страница: 9 / 21

V2100B Series | Quick Guide
8
2.2.2 Mounting & Wiring
Step 1. Mounting Preparation
⚫ Use the guide pattern to mark out and prepare a mounting area.
1.
Place the supplied guide pattern on a mounting surface. Drill 6 mm (0.25”) outer holes x 3 at the
mounting surface corresponding to the 3 indicated positions for plastic anchors.
2.
Then hammer the 3 plastic anchors into the 3 drilled holes on the mounting surface.
Figure 2 - 1: Guide Pattern
Step 2. Mounting the Camera
1.
Position the camera to match the 3 holes embedded with the plastic anchors on the surface.
2.
Secure the 3 tapping screws to fasten the camera with the mounting surface tightly.
V2100B V2100B Mini
Figure 2 - 2: Mounting the Camera
This section is the area
reserved for cable entry space.
Plastic Anchors
Tapping Screws
Plastic Anchors
Tapping Screws