Vicon Roughneck V2100B Series, Быстрое руководство

Страница: 18 / 21

V2100B Series | Quick Guide
17
3.4 IP Toolbox
IP Toolbox is a utility program that helps users to locate the camera(s) in local area network that computer is
connected to. Note that IP Toolbox works only in Microsoft Windows XP, Microsoft Windows Vista, and
Microsoft Windows 7 or above. Steps to get the utility program running are listed below.
1.
Download the IP Toolbox folder to local computer. The latest IP Toolbox can be found on Vicon’s website
Camera Software Download page, vicon-security.com.
2.
Double click on IPToolbox.exe in the IP Toolbox’s folder, and the IP Toolbox window should pop up as
below.
Figure 3 - 7: IP Toolbox
3.
The window lists information of camera(s) in operation at the present time. Click the camera in the list for
which you want to configure the network settings.
4.
Configure the following settings as needed.
▪ User Name & Password: Before performing any operation to any listed camera, enter username and
password for the selected camera, and then click “ Verify ” for authentication purposes.
▪ Camera Name: Enter a descriptive name for the camera.
▪ Network Settings: If you have a DHCP server on your network to assign IP addresses to network
devices, enable the “dhcp” option from dropdown menu of IP MODE . Otherwise, select “manual” to
manually enter the values for IP Address , Subnet Mask , Gateway and HTTP Port fields.
▪
Click “Save” to enable the settings. Click “ Cancel ” to discard the settings.
5.
Press “View” button; the designated browser page of the selected camera will pop up. Input the
corresponding User Name & Password to log in to the specific page of camera.
6.
Press “Refresh” button; all the cameras currently connected to the network will appear on the list.
7.
Press “Initialize” button; there are three options, Software default, Hardware default, and Reboot
camera, for user to perform the factory default or reboot the camera. After clicking the preferred item, a
warning message will appear. Confirm again before you perform the selected function.
8.
The “ Filter ” button on the upper-right corner allows user to perform a filtering search, which means you