Vicon Roughneck V2100B Series, Быстрое руководство

Страница: 10 / 21

V2100B Series | Quick Guide
9
Step 3. Wiring the Camera
1. While mounting the camera, pass the
PoE Port and 12 VDC Port cable from the mounting bracket, through
the hole of mounting surface or place them by the side hole of the mounting bracket as the following figures
shown depending on your different applications.
2.
Connect an Ethernet cable terminated with the RJ-45 connector with the PoE Port of the camera and
make sure the other end of the Ethernet cable connects with a PoE compatible network device that
supplies power with networking capability. Also, connect 12 VDC power source wires to the 12 VDC port
if necessary.
Pay attention to the polarities when connecting wires to the 12 VDC port.
Figure 2 - 3: Connecting the Wires Type
Ⅰ
- Bracket Side Hole
Figure 2 - 4: Connecting the Wires Type
Ⅱ
– Mounting Surface Hole
Ethernet Cable with
RJ-45 Connector
PoE Port
12 VDC Port