Vicon Roughneck Pro V2000B Series, Быстрое руководство

Страница: 8 / 21

V2000B Quick Guide
7
2 Installation and Connection
2.1 Package Contents
Check if all items listed below are included in the packing box.
1.
IR Bullet Camera * 1
2.
Plastic Anchor * 6
3.
Self-tapping Screw (T10) * 6
4.
T10 Security Torx Bit * 1
5.
Mounting Template * 1
2.2 Installation
The following tools might help you complete the installation:
⚫ Drill
⚫ Screwdrivers
⚫ Wire cutters
2.2.1 Checking Appearance
When unpacking, check to see if there is any visible damage to the appearance of the camera and its
accessories. The protective materials used for the packaging should protect the camera from most accidents
during shipment. Remove the protective materials from the camera after every item is properly checked in
accordance with the list in Package Contents.
2.2.2 Mounting Preparation
⚫ Use the guide pattern to mark out and prepare a mounting area.
1.
Place the supplied guide pattern (template) on a mounting surface. Drill 6 mm (0.25”) outer holes x 6
at the mounting surface corresponding to the 6 indicated positions for plastic anchors.
2.
Then hammer the 6 plastic anchors into the 6 drilled holes on the mounting surface.
Figure 2 - 1: Guide Pattern
This section is the preserved
area for cable entry space.