Vicon Roughneck Pro V2000B Series, Быстрое руководство

Страница: 10 / 21

V2000B Quick Guide
9
2.
Position the camera to match the 6 holes embedded with the plastic anchors on the surface.
3.
Secure the 6 tapping screws tightly to fasten the camera with the mounting surface.
Figure 2 - 4: Mounting the Camera
2.2.4 Connecting the Cables
1.
Based on your needs, connect the power cable to the power port via one of the following 3 options.
•
24 VAC: Connect a power cable that supplies 24 VAC power source to the terminal block and then
insert the terminal block into the power port.
•
12 VDC: Connect a power cable that supplies 12 VDC power source to the terminal block and then
insert the terminal block into the power port.
NOTE: Make sure the polarities match when using 12 VDC power source.
•
PoE (Class 3): Connect an Ethernet cable terminated with an RJ-45 connector to the PoE RJ-45 port
for both power supply and network connectivity purposes simultaneously.
2.
Insert audio in/out cables and alarm in/out cables to the corresponding terminals of the camera if
required.
Figure 2 - 5: Conneting the Cables
Plastic Anchors
PoE
Tapping Screws
24 VAC
12 VDC
Audio In/Out
Alarm In/Out
Terminal Block