Vicon NOVA V1466A, Руководство по программированию

Страница: 40 / 103

X897-01 Rev 1205 NOVA V1466A Alarm Actions
•
29
Alarm Actions
The alarm actions available with Powerplus software provide versatile responses to activated alarms while
maintaining simple alarm programming procedures. There are 256 alarms available from receivers and 256
alarms available from alarm interface devices (V1200X-IA or V1300X-IA). Both alarms associated with a
particular input number will activate if either activates, depending upon programming choices. If receiver
alarm input 001 or X-IA alarm 001 activates, the Edit Alarm Call-up (refer to page 36) choices for alarm input
001 will be used. Therefore, there are only 256 alarm actions for the 512 alarms. For more information on
alarm operations, refer to
Models V1300X-DVC and -RVC Intelligent Remote Control Panels Instruction
Manual X777. Enter the number of a submenu.
Menu Path: Main Menu
→
Alarm Actions
ENTER SELECTION
ESC - PREVIOUS MENU
1) SET ALARM STACK MODE
2) SET ALARM ACTIONS
3) SET MONITOR ACTIONS
4) SET RECEIVER ACTION
5) SET INPUT CONTROLS
6) SET SERIAL PORT
ALARM ACTIONS MENU
Set Alarm Stack Mode
When multiple alarms are activated, a list of the activated alarm input numbers is created in temporary
memory. A separate list may be maintained for each alarm monitor, or one list may be used for all alarm
monitors, depending upon the monitor stack mode chosen for the system.
Menu Path: Main Menu
→
Alarm Actions
→
Set Alarm Stack Mode
SET ALARM STACK MODE
x / - - CYCLE CHOICE
, , , - CURSOR UP/DWN
ENTR/ESC - STORE/ABORT
MONITOR STACK MODE :
COMMON STACK
ALARM INPUT ORDER :
FIFO