Vicon NOVA V1466A, Руководство по программированию

Страница: 22 / 103

X897-01 Rev 1205 NOVA V1466A Administration
•
11
Logoff Dwell
If Auto Logoff was enabled as discussed in the previous section, the Logoff Dwell time and units must be
specified. If no communications take place between the programming keyboard and the V1466A for the
period of time specified in Logoff Dwell, the administrator will be automatically logged off of the system. This
does not refer to remote keypads.
Setting:
00 to 60 minutes
00 to 60 seconds
Keys: F2 to increment time
F3 to decrement time
Shift and F2 to toggle units
Shift and F3 to toggle units
Default: 00 seconds
Configure Host Port
The host port located on the rear connector of the V1466A (jack J1) is typically connected to a personal
computer (the “host computer”). Unless the PC is running software which automatically detects the V1466A
communication settings, the PC’s communication settings must be defined. The settings for the host
computer and the V1466A must agree.
Menu Path: Main Menu
→
Administration
→
Configure Host Port
x / -
/
ENTR/ESC
-
-
-
CYCLE CHOICE
CURSOR UP/DWN
STORE/ABORT
BAUD RATE
DATA BITS
STOP BITS
PARITY
LOGOFF DWELL
PASSCODE
19.2K BPS
8
1
NONE
DISABLED
000000000
:
:
:
:
:
:
CONFIGURE HOST PORT
Baud Rate
The baud rate is the speed at which data is transferred between the V1466A and the host computer. The
baud rate of the host computer must agree with the parameter set in this screen.
Settings: Disabled
300
BPS
600 BPS
1200 BPS
2400 BPS
4800 BPS
9600 BPS
19.2K BPS
Keys: Numeric keypad’s + (plus) key or - (minus) key
Default: 19.2K BPS