Vicon KRX-3V5, Руководство по установке и эксплуатации, Страница: 9 / 39

Chapter 1 - Introduction
The information in this manual covers the installation and operation of the KRX-3V5 Video Decoder. This
system should only be installed by a qualified technician using common hand tools and approved materials
and wiring practices in accordance with the National Electrical Code ANSI/NFPA 70, state and local wiring
codes.
The KRX-3V5 is a Video Decoder used to convert network data from a digital IP source to an analog output
for display on any monitor with an S-Video, mini D-sub or coaxial BNC-F input. This enables distribution
directly to a monitor and eliminates the need for separate workstations with dedicated monitors. It is sold in a
prepackaged configuration ready for analog monitor connection. It will provide a video (frame per second) rate
of up to 90 fps over 3 channels or up to 30 fps per channel (25 fps for PAL). It is fully compatible with the
ViconNet software (Version 5.X) application. For software information, refer to the ViconNet Software manual,
XX113. The KRX-3V5 can be networked with all models of Version 4.X Kollector Elite NVRs and ViconNet
Workstations to create a complete system.
The KRX-3V5 complies with CE and meets requirements for an FCC Class A computing device.
Vicon strongly recommends the use of line conditioners, voltage regulators and uninterruptible power supply
(UPS) systems in the electrical power service.
NOTE: Read all instructions before beginning the installation.
How to Use This Manual
This manual was designed to provide the best overall instructions for the installation and operation of the
KRX-3V5 Video Decoder. The graphics and terminology used in this manual have been carefully selected to
enable a clear and distinct understanding of the KRX-3V5 and its configuration. This manual has been
formatted to present distinct methods of installation for all levels of experience installers.
Accessory Kit
The provided accessory kit contains necessary items needed to install and wire the decoder during
installation as follows:
Table 1-1: Accessory Kit
Part Description
ViconNet Ver. 5.X CD Software needed for installation
Installation and Operation Manual Provides instructions on installation, configuration and operation.
Rubber Bumpers For desk-top installation
5-position connectors For wiring alarm, RS-232 and RS-422/RS-485. Future use.
2-position terminal block For wiring power
XX184-01-00 KRX-3 Video Decoder Chapter 1 - Introduction
•
1