Vicon KRX-3V5 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 39

Vicon KRX-3V5 Скачать руководство пользователя страница 11

Chapter 2 – Quick Installation

Figure 2-1: KRX-3V5 Quick Installation

1. Unpack the decoder, and accessories, from its box. Verify that hand tools and a suitable Netswitch/

Kollector/ViconNet Workstation or VN-NVR are available for connection.

2. Perform physical installation (to a desktop, wall, or rack) using the optional mounting kits, if required.

3. Make all connections to monitors, LAN, and power.

NOTE: The KRX-3V5 maybe powered by PoE using the LAN connection or with 24 VAC. Recommended 24

VAC power supply models are the S24WPS-1 for 120VAC installations and S24PS-230 for 230 VAC
installations or latest equivalents.

4. Power on the decoder. Run the provided ViconNet CD and choose software, KRX-3V5 setup, to

configure the correct IP address, using the provided MAC address. (See your System Administrator

for assistance in IP addressing.)

5. Run the ViconNet Virtual Matrix Controller (VMC) application and verify that the KRX-3V5 displays on

the monitor layout setup list.

XX184-01-00 KRX-3 Video Decoder

Chapter 2 – Quick Installation

•

3

«
...
9
10
11
12
13
...
»

Содержание KRX-3V5








































Отзывы:

Нет отзывов