Vicking electronics
Pag. 7
Differences with the old WORKmate 36
WORKmate 36
WORKmate II
Display
2 Line 16 characters
no backlight
4 Line 16 characters
with backlight
LED’s
No leds
Red and green led
Beeper
Fixed tone
Programmable tone
Firmware
Manually change EPROM
Download in Flash ROM
Connectors
Optional barcode
Standard 2 multifunctional connectors
Input / Ouput
1 relays
1 input (no counter)
1 barcode reader
1 proximity reader
2 relays
2 inputs (can count pulses)
2 barcode readers
2 proximity readers
2 Switch inputs
2 Transistor outputs
1 RS232 port standard
Badge readers
Special mode for badge readers
The inputs and communication are
shut-down in this mode
No special mode for badge readers
The whole WORKmate stays functional.
Concentrator
Network
Connection with DIN connector
Connection with RJ-45
With DIN or direct cable connection
on the I/O board
Power
Very low power consumption.
Linear power regulator
WORKmate draws more power.
Switching power regulator
Housing
Simple housing needs accessories to
mount.
Design housing easy to mount on the wall or
place on the table.
Settings
With DIP switches
With a menu, the parameters are stored in
flash memory.
