VibroSystM DMV-100, Руководство по установке

Страница: 2 / 52

2 DMV-100 Rotor Creep and Speed Detector
P/N: 9428-25I4A-400
Safety information
This manual contains information and warnings that must be observed to keep the instruments in a safe
condition and ensure safe operation.
•
To use VibroSystM instruments correctly and safely, read and follow all the safety instructions or warnings
given throughout this manual.
•
To avoid electric shock, personal injury, or death, carefully read the information under «Safety Information»
before attempting to install, use, or service this instrument.
•
In addition, follow all generally accepted safety practices and procedures required when working with and
around electricity.
•
For safe operation and to ensure that your system functions at its optimum capacity, the installation and
adjustment process should be handled only by VibroSystM trained service specialists.
•
Install and use this instrument only as specified in this manual, or the protection provided by this instrument
might be impaired.
•
Do not use the instrument in wet environments.
•
Whenever it is likely that safety protection has been impaired, make this instrument inoperative and secure
it against any unintended operation.
•
Have this instrument serviced only by qualified service personnel.
•
Never remove the cover or open the case of this instrument without first turning off the main power source.
•
Never operate this instrument with the cover removed or the case open.
•
Do not operate this instrument around explosive gas, vapor, or dust.
Table 1: Safety and electrical symbols that appear in this manual and on the material
Warning - Danger - identify conditions or practices that could cause bodily harm, and
result in damage to the measuring chain and other equipment to which it is connected.
Conditions include a risk of electric shock (voltage > 30 V
DC
or V
AC
peak might be
present).
Caution - identify conditions or practices that could result in permanent loss of data.
Important information.
Electronics common - not linked to earth ground.
(Shield) cables shield-to-earth ground, frame or chassis terminal - linked to earth
ground.
2727 Jacques-Cartier E. Blvd, Longueuil QC J4N 1L7 Canada | Tel.: 450 646-2157 | 800 663-8379 (U.S. only) | Fax: 450 646-2164
Email: techsupp@vibrosystm.com | vibrosystm.com