3c Adjusting the Position of the Saddle
The angle of the saddle
C
should be adjusted so that it is horizontal to the floor. To adjust the tilt of
the saddle, loosen the saddle clamp nuts
G
a quarter of a turn at a time using the multitool supplied
until the saddle can be moved.
If required, the saddle
C
can be moved forwards or backwards on the seat post while the saddle
clamp nuts
G
are loose.
Once the saddle
C
is positioned correctly, retighten the saddle clamp nuts
G
.
3d Adjusting the Height of the Saddle
The height of the saddle
C
should be adjusted so that the Rider can comfortably touch the ground
with both feet. To adjust the height of the saddle
C
, loosen the seat post bolt
H
until the seat post
can move freely.
Once the saddle
C
is positioned correctly, retighten the seat post bolt
H
.
WARNING!
When assembling the seat post, make sure it is inserted beyond the minimum insert
mark. Failure to observe this warning may lead to a potentially unstable seat post and may result in
serous personal injury.
C
G
H
C
d
3
c
3
9
Step 3 (continued)
Assembly
Customer Helpline 0845 640 0800
3a Insert the Seat Post and Saddle
WARNING!
When assembling the seat post, make sure it is inserted beyond the minimum insert
mark. Failure to observe this warning may lead to a potentially unstable seat post and may result in
serous personal injury.
Insert the lower end of the seat post and saddle
C
into the seat tube of the bike
A
.
3b Securing the Seat Post
Using the supplied hexagonal key, tighten the seat post bolt
H
firirmly.
0345 640 0800