IMPORTANT!
Before assembling the bike, check all the parts indicated in the manual are in the
box. Inspect the parts for signs of damage. Do not assemble the bike if you observe any damaged
components.
IMPORTANT!
Always take care when removing the packaging to prevent damage to the bike.
1. Remove the bike from the box and carefully remove all packaging. The following types of
packaging are used to protect the bike during transit:
• Cardboard Wrapping - This is used to protect the painted surfaces of the bike frame.
• Cable Ties - These are used to secure loose parts to the partially assembled bike.
• Stem Caps - These are placed in unprotected ends of the bike frame.
• Axle Protectors - These are used to protect the outer edges of the front and rear wheel axles.
• Fork Protectors - These are used to prevent the suspension forks from bending or being
damaged.
• Handlebar Stem Protector - This is used ensure the wedge nut remains in the correct
orientation during transit.
2. The packaging should be retained until the bike is fully assembled. Use the box to store the
packaging during assembly.
NOTE!
Always recycle the packaging in accordance with local recycling schemes.
Step 1
Assembly
Customer Helpline 0845 640 0800
2a Insert the Stem
WARNING! When assembling the handlebars and stem, make sure it is inserted beyond the
minimum insert mark
. Failure to observe this warning may lead to a potentially unstable bike and
may result in serious personal injury.
If necessary, loosen the stem bolt at the top of the handlebars and stem
B
to allow the wedge nut to
move freely.
Ensuring the wedge nut is correctly aligned, insert the lower end of the handlebars and stem
B
into
the head tube of the bike
A
.
Step 2
6
A
B
2a
0345 640 0800