Viavi T-BERD 5800 Скачать руководство пользователя страница 90 | Manualshive

Страница: 90 / 100

background image

Appendix B

Storage and Shipment

Storing the instrument and module

T-BERD/MTS 5800 Timing Expansion Module User Manual

Page 74

22112315, Rev. 004

July 2017

Storing the instrument and module

When the instrument and TEM Module are not in use, they can be stored.

The battery discharges slowly while in the instrument. Continued storage while in a
discharged state could result in performance degradation. For this reason, Viavi recom-
mends removing the battery if the instrument will not be used for more than a week.
Store the battery in a cool, dry, clean environment. Do not leave the battery in a car or
truck, particularly during extremely warm weather.

While out of the instrument, the battery will discharge at a slow rate. Viavi recommends
checking the battery periodically while it is in storage, and keeping it charged to at least
40%. For additional information about maintaining the battery, see “Maintaining the
battery” in the base unit manual that shipped with your instrument.

Using the instrument and module after prolonged storage

The first time you use the instrument and TEM Module after prolonged storage, use the
AC power adapter to power up the 5800v2 and TEM Module. The time required to warm
up the TEM Module’s oscillator will vary depending on the storage temperature.

Transporting your TEM Module

When taking your TEM Module and 5800v2 instrument to a new location for testing,
consider the following:

•

The “auto-off” Power Management feature on the 5800v2

should be disabled

to

ensure that the TEM Module does not suddenly lose power.

•

Viavi strongly recommends using a power inverter during transport. If you are not
using an inverter, consider removing all test applications before transporting the
instrument. This will maximize the battery run time to the best degree possible.

•

The components (TEM Module, GNSS antenna, and 5800V2 test instrument)
must be protected from rain, snow, and extreme weather conditions to the best
degree possible.

•

The components should be transported in the passenger area of your vehicle, and
secured to prevent damage in the event of a sudden stop or collision.

An optional glove bag is available to protect the components, and an optional power
inverter is available that allows you to leave the oscillator ON (to maintain 1PPS preci-
sion) during transport. For details concerning the glove bag or power inverter, contact
Viavi Customer Care at 1-866-228-3762 or at

www.viavisolutions.com

.

NOTE:

Viavi is not liable for any damage that may occur during transport.

«
...
88
89
90
91
92
...
»

Содержание T-BERD 5800





































































































Отзывы:

Нет отзывов

Похожие инструкции для T-BERD 5800

VLT AutomationDrive FC 302

Бренд: Danfoss Страницы: 128

VLT DriveMotor FCP 106

Бренд: Danfoss Страницы: 4

FOUNDATION 3730-5

Бренд: Samson Страницы: 132

Бренд: Samson Страницы: 68

Бренд: Samson Страницы: 128

Бренд: Samson Страницы: 68

Бренд: X-POWER Страницы: 24

Бренд: Samson Страницы: 80

Бренд: Haehne Страницы: 44

Бренд: Water Specialist Страницы: 60

Бренд: Parker Страницы: 38

Бренд: Parker Страницы: 2

Бренд: mikroElektronika Страницы: 3

Бренд: Window Master Страницы: 7

Бренд: NXP Semiconductors Страницы: 39

ACTIVAL VY51 5H006

Бренд: Azbil Страницы: 20

Бренд: Firmtech Страницы: 19

Бренд: AUMA Страницы: 168

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды