Chapter 3
High Accuracy Timing
Configuring the module
T-BERD/MTS/SC Timing Expansion Module User Manual
July 2017
22112315, Rev. 004
Page 33
on the Location tab to indicate that a survey does not need to be conducted. In this
mode, precise timing can be maintained from the signal received from a single satellite.
To specify fixed position settings
1
Select the
Timing Module
tab, then select the
Setup
soft key.
The
GNSS
setup tab appears.
2
On the left of the screen, select
Location
.
The
Location
setup tab appears.
3
Do one of the following:
–
If you have previously saved the location (and its coordinates), select the
Location Name
.
–
If you are certain of the coordinates, and you want to enter them manually,
specify the
Fixed Position Accuracy
(in meters),
Latitude
(as degrees),
Longitude
(as degrees), and
Altitude
(in meters). The specified altitude
should represent the height above the reference ellipsoid (which approxi-
mates the earth’s surface); do not specify the altitude as it relates to the
height above mean sea level.
4
Select the grey
Position Fixed
action button to the left of the Fixed Position Accu-
racy (m) field.
The button turns yellow (indicating that it is On), and the position is fixed.
The fixed position settings are specified.
Saving location coordinates
If you know that you will conduct testing in the future at the same location, you can save
the location’s coordinates.
To save location coordinates
1
At the bottom of the Location tab, select
Location Name
.
2
Enter the name of the location.
3
Select
OK
.
The coordinates for the location are saved.
NOTE:
The specified Fixed Position Accuracy value must be reasonably accurate or
performance may be degraded.
Содержание T-BERD 5800
Страница 1: ...T BERD MTS 5800 Timing Expansion Module User Manual ...
Страница 2: ......
Страница 99: ......
