OLP-85/OLP-85P
43
S
AVING
P
OWERMETER
TEST
RESULTS
6 P
OWERMETER
O
PERATION
To set the actual power level as reference level:
I
The instrument is in Powermeter mode.
J
Press the
[
A
]
key and tap the
[
Store ABS > REF
]
button.
The actual power level is set as the new reference level. The
reference level is displayed underneath the wavelength.
Reference power level display mode is activated.
NOTE:
The reference level is stored for each wavelength and is saved
even when the power is off.
Saving Powermeter test results
Before starting a measurement a project must be selected and
set to active. Thus, all results are assigned to that project when
saved. If no project was defined by the user, the instrument will
use the Test-Tool project “default”, which is always present (see
“Managing Projects” on page 35).
Results are stored simply by pressing the
[
G
]
key. Each time the
key is pressed, the result just displayed will be saved.
To save current results:
I
The instrument is in application mode and displays the test
results (overview or details) to be stored.
1.
Press the
[
G
]
key.
The Save dialog is displayed.
As file name the label prefix defined in the project settings is
showed on top of the display.
2
4
1
3
