Safety & Compliance
General Safety
MAP-200 Optical Switch mOSW-C1 Installation and User Guide
Standard
June 2016
Document Number 22112369-120 R000
Page 12
General Safety
The MAP-200 system, including functional cassettes complies with CSA/UL/IEC
61010-1.
The following safety information must be observed whenever the unit is operated,
serviced, or repaired. Failure to comply with any of these instructions or with any
precaution or warning contained in this user manual is in direct violation of the
standards of design, manufacture, and intended use of the unit. Viavi assumes no
liability for the customer's failure to comply with any of these safety requirements.
WARNING
To avoid the risk of injury or death always observe the following precautions
before connecting the unit to power, during initialization and during operation of
the unit:
•
Use only the type of power cord supplied with the unit.
•
Do not use the unit outdoors.
•
To prevent potential fire or shock hazard, do not expose the unit to
any source of excessive moisture.
•
Do not perform any operating or maintenance procedure that not
described in this user manual. All other repairs must be done by a
qualified Viavi professional.
•
Do not operate the unit with its covers or panels removed.
WARNING: LASER SAFETY
To avoid the risk of injury always observe the following precautions before
connecting the unit to power, during initialization and during operation of the
unit:
•
Never look into the end of an optical cable connected to an optical
output device that is operating. Laser radiation is invisible, and direct
exposure can severely injure the human eye.
•
Turning off the power to the device does not always block the
externally supplied radiation to the connector at the output of the
unit.
•
Do not perform any operating or maintenance procedure that not
described in this user manual. All other repairs must be done by a
qualified Viavi professional.
•
Do not operate the unit with its covers or panels removed.
