OLP-87/OLP-87P
49
S
AVING
PON
METER
TEST
RESULTS
6 PON
METER
O
PERATION
To save current results:
I
The instrument is in application mode and displays the test
results (overview or details) to be stored.
1.
Press the
[
G
]
key.
The Save dialog is displayed.
As file name the label prefix defined in the project settings is
showed on top of the display.
2.
To edit the label name, tap the field, edit the name and tap
[
OK
]
.
3.
To change the ID, tap
[
Decrement ID
]
or
[
Increment ID
]
.
4.
Press the
[
G
]
key again or tap the
[
Save
]
button.
The measurement is stored in the current active project.
NOTE:
When measuring two wavelengths at a time both wavelengths
are stored separately. Thus, the ID is incremented by 2.
NOTE:
If the label/fiber ID is not changed, the data set will be saved
under the same title. Then the Data can be distinguished and
sorted by the Timestamp.
1
Defined label name.
J
Tap field to edit label name.
2
• Probe: Number of already saved probe results.
• Powermeter: Number of already saved powermeter results.
• PCM: Number of already saved PCM results.
• PONmeter: Number of already saved PONmeter results.
3
Decrease / increase label ID
4
Save results
2
4
1
2
3
