manualshive.com logo in svg

Viavi BN 2305/01, Руководство по эксплуатации, Страница: 22 / 95

Поделиться
Скачать
Viavi BN 2305/01 Скачать руководство пользователя страница 22

22

 OLP-87/OLP-87P

3  G

ETTING

 S

TARTED

U

NPACKING

 

THE

 

INSTRUMENT

Insert new or replace the RBP2 LiIon Battery Pack.

– or –

Switch from non-rechargeable batteries to rechargeable ones 

by replacing the battery tray with a new battery pack (or vice 

versa).

3.

Close the battery compartment.

4.

Press the 

[

E

]

 key to switch on.

Recharging the batteries

The rechargeable RBP2 LiIon Battery Pack is recharged when the 

PS4 Universal AC/DC Power Supply is being used to power the 

instrument. The instrument switches to trickle charging 

automatically as soon as the RBP2 LiIon Battery Pack is fully 

charged.

NOTE:

Rechargeable AA batteries will not be recharged in the 

instrument. For AA-type rechargeable batteries please use an 

external charger.

It is not possible to charge the rechargeable AA batteries or the 

RBP2 LiIon Battery Pack via the USB interface.
The instrument is powered by the PS4 Universal AC/DC Power 

Supply if the PS4 Universal AC/DC Power Supply and the USB 

interface are both connected.

Deep discharge

A rechargeable battery that appears to be dead (unit will not 

turn on even when connected to external power) may well be in 

a deep discharge state. It can be fully charged with the following 

charging cycle:

1.

Plug in the power cord for 1–1.5 hours.

Battery should be partly charged now.

2.

Switch the power on.

If the instrument starts: Let the battery fully charge.

– or –

If the instrument does not start: 

Unplug power cord, plug it back in and repeat steps 1 and 2.

NOTE:

If the battery is completely deep-discharged, this cycle might 

need to be repeated up to 3 times.

Содержание BN 2305/01
































































































Отзывы:

Нет отзывов