This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment
and receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV
technician for help.
The device has been evaluated to meet general RF
exposure requirement. The device can be used in
portable exposure condition without restriction.
Manufacturer: Shenzhen Viatom Technology Co., Ltd
ddress: 4E, 3#, Tingwei Industrial Park, Honglang
North 2nd Road, Baoan
District, Shenzhen, China
Weibsite:
MedNet EC-REP GmbH
Borkstraße 10
48163 Münster Germany
Telefon: +49 (0) 251 32266-64
Telefax: +49 (0) 251 32266-22
Model: PO2
Version: A
©Copyright 2019 Shenzhen Viatom Technology Co., Ltd.
All rights reserved.
0197
