VB7009 User Manual
65
6.20.
Power Management Setup
EuP/ErP Lot6
Power Management Setup
[Disabled]
ACPI Suspend Type
[S1&S3]
[Enable] or [Disable]
EuP/ErP Lot6 support
used GPIO0, for MB
VT8595C and later.
AC Loss Auto Restart
Wakeup Event Detect
[Off]
[Press Enter]
Soft-Off by PWRBTN
[Instant-Off]
Run VGABIOS if S3 Resume
[Auto]
WDRT Run/Stop
[Run]
WDRT Count
[1023]
WDRT Support
[Enabled]
HPET Support
[Enabled]
Phoenix - AwardBIOS CMOS Setup Utility
Item Help
Menu Level
ESC: Exit
F5: Previous Values
: Move
F10: Save
Enter: Select
+/-/PU/PD: Value
F1: General Help
F7: Optimized Defaults
Figure 63: Illustration of the Power Management Setup screen
The Power Management Setup section includes the following submenus:
Wakeup Event Detect
6.20.1.
EuP/ErP Lot6
This feature determines whether to let the system consume less power ACPI S3/S4/S5 state.
Settings: [Disabled, Enabled]
Note:
When EuP/ErP Lot6 support is enabled, the Wake on LAN from system OS ACPI S3/S4/S5 state will be
disabled.
6.20.2.
ACPI Suspend Type
Settings
Description
S1(POS)
S1/Power On Suspend (POS) is a low power state. In this state, no system context
(CPU or chipset) is lost and hardware maintains all system contexts.
S3(STR)
S3/Suspend To RAM (STR) is a power-down state. In this state, power is supplied only
to essential components such as main memory and wakeup-capable devices. The
system context is saved to main memory, and context is restored from the memory
when a “wakeup” event occurs.
S1 & S3
Depends on the OS to select S1 or S3.
6.20.3.
Soft-Off by PWRBTN
Settings
Description
Delay 4 Sec System is turned off if power button is pressed for more than four seconds.
Instant-Off
Power button functions as a normal power-on/-off button.
StockCheck.com
Downloaded from StockCheck.com