VB7009 User Manual
52
The specifications of your drive must match with the drive table. The hard disk will not work properly if
you enter incorrect information in this category. Select “Auto” whenever possible. If you select “Manual”,
make sure the information is from your hard disk vendor or system manufacturer.
Below is a table that details required hard drive information when using the “Manual” mode.
Settings
Description
[storage] Channel
The name of this match the name of the menu.
Settings: [None, Auto, Manual]
Access Mode
Settings: [CHS, LBA, Large, Auto]
Capacity
Formatted size of the storage device
Cylinder
Number of cylinders
Head
Number of heads
Precomp
Write precompensation
Landing Zone
Cylinder location of the landing zone
Sector
Number of sectors
StockCheck.com
Downloaded from StockCheck.com