VIA Technologies P4X266-PE11-L страница 2 Скачать руководство пользователя

Страница: 2 / 95

This publication contains information that is protected by copyright.

No part of it may be reproduced in any form or by any means or

used to make any transformation/adaptation without the prior

written permission from the copyright holders.

This publication is provided for informational purposes only. The

manufacturer makes no representations or warranties with respect to

the contents or use of this manual and specifically disclaims any

express or implied warranties of merchantability or fitness for any

particular purpose. The user will assume the entire risk of the use or

the results of the use of this document. Further, the manufacturer

reserves the right to revise this publication and make changes to its

contents at any time, without obligation to notify any person or

entity of such revisions or changes.

Trademarks

Windows

98, Windows

98 SE, Windows

ME, Windows

2000

and Windows NT

4.0 are registered trademarks of Microsoft

Corporation. Intel

and Pentium

4 are registered trademarks of

Intel Corporation. VIA is a registered trademark of VIA Technologies,

Inc. Award is a registered trademark of Award Software, Inc. Other

trademarks and registered trademarks of products appearing in this

manual are the properties of their respective holders.

Caution

To avoid damage to the system:

Use the correct AC input voltage range

To reduce the risk of electric shock:

Unplug the power cord before removing the system chassis

cover for installation or servicing. After installation or servicing,

cover the system chassis before plugging the power cord.

Содержание P4X266-PE11-L
































































































Результаты поиска

Содержание P4X266-PE11-L

Отзывы:

Похожие инструкции для P4X266-PE11-L

Бренды по названию

Популярные бренды

VIA Technologies P4X266-PE11-L, Руководство пользователя

Результаты поиска

Содержание P4X266-PE11-L

Отзывы:

Похожие инструкции для P4X266-PE11-L

Бренды по названию

Популярные бренды