VIA Technologies P4X266-PE11-L страница 82 Скачать руководство пользователя

Страница: 82 / 95

Supported Software

4.2 Hardware Monitor

The mainboard comes with the Hardware Monitor utility contained in

the provided CD. It is capable of monitoring the systems hardware

conditions such as the temperature of the CPU and system, voltage,

and speed of the CPU and chassis fans. It also allows you to

manually set a range to the items being monitored. If the values are

over or under the set range, a warning message will pop-up. We

recommend that you use the Default Setting which is the ideal

setting that would keep the system in good working condition.

Note:

Use this utility only in Windows

98, Windows

98 SE, Win-

dows

ME, Windows

2000 or Windows NT

4.0 operating

system.

To install the utility, insert the CD into a CD-ROM drive. The autorun

screen (Main Board Utility CD) will appear. Click the Hardware

Monitor button to install the utility. Refer to its readme file for

instructions on using the utility.

4.3 VIA Service Pack

The CD in the mainboard package also comes with the VIA Service

Pack. The service pack includes the following drivers.
VIA ATAPI Vendor Support Driver

AGP VxD Driver

IRQ Routing Miniport Driver

VIA INF Driver

To install the drivers, insert the CD into a CD-ROM drive. The

autorun screen (Main Board Utility CD) will appear. Click the VIA

Service Pack button. For installation instructions or information, click

the Read Me button in the autorun screen.

Содержание P4X266-PE11-L
































































































Результаты поиска

Содержание P4X266-PE11-L

Отзывы:

Похожие инструкции для P4X266-PE11-L

Бренды по названию

Популярные бренды

VIA Technologies P4X266-PE11-L, Руководство пользователя

Результаты поиска

Содержание P4X266-PE11-L

Отзывы:

Похожие инструкции для P4X266-PE11-L

Бренды по названию

Популярные бренды