VIA Mainboard 845D-MVT Скачать руководство пользователя страница 8

Страница: 8 / 41

The 845D-MVT MAINBOARD

Page 8

Introduction

USB Ports

USB allows data exchange between your computer and a wide range of

simultaneously accessible external Plug and Play peripherals. The 845D-MVT

mainboard is equipped with four USB connectors. USB 1 and USB 2 are

external connectors. They can be found on the PC 99 ATX connector. The other

USB connectors are internal connectors and can be used to connect other USB

devices. (Cables for the internal connectors are sold separately).

Note: The internal USB connectors (CN30 and CN31) are non-standard. When

you purchase the cable please ensure that the connector on one side of the

cable is compatible with the internal USB connector and the connector on the

other side of the cable is a standard USB connector.

Connectors

Two IDE connectors

One floppy drive interface supports up to two 2.88 MB floppy drives

One 20-pin ATX power supply connector

One 4-pin (2x2) 12V ATX power supply connector

One 4-pin (1x4) ATX Auxiliary power supply connector

One CPU fan and two Chassis fan connectors

One CD audio in connector

One AUX-IN connector

One front audio connector

One WOL (Wake-On-LAN) connector

One 4 CH OUT Connector (Optional)

ATX Double Deck Ports (PC99 color-coded connectors)

Two USB ports

Two external DB-9 serial port connector: COM1 and COM2 (UART)

One VGA connector

One SPP/ECP/EPP DB-25 parallel port

One mini-DIN-6 PS/2 mouse port

One mini-DIN-6 PS/2 keyboard port

One GAME/MIDI port

Three audio jacks: SPK-OUT, LINE-IN and MIC-IN

PCI Bus Master IDE Controller

Two PCI IDE interfaces support up to four IDE devices.

Supports ATA/33, ATA/66 and ATA/100 hard drives.

PIO Mode 3 and Mode 4 Enhanced IDE (data transfer rate up to 16.6
MB/sec.).

Bus mastering reduces CPU utilization during disk transfer.

Supports ATAPI CD-ROM, LS-120 and ZIP.

Содержание 845D-MVT










































Результаты поиска

Содержание 845D-MVT

Отзывы:

Похожие инструкции для 845D-MVT

Бренды по названию

Популярные бренды

VIA Mainboard 845D-MVT, Руководство пользователя

Результаты поиска

Содержание 845D-MVT

Отзывы:

Похожие инструкции для 845D-MVT

Бренды по названию

Популярные бренды