The 845D-MVT MAINBOARD
Page 16
2.5.5. WOL (Wake-On-LAN) Connector
Connector: CN16
Type: 3 pin
The mainboard has a WOL (Wake-On-LAN) connector. This connector must be
connected to a LAN card that has Wake-On-LAN (WOL) output. It powers up
the system when a wakeup packet or signal is received through the LAN card.
In order to use the WOL LAN card to trigger the power on the PC system, the
switching power supply must have the ability to provide a driving current of at
least 720 mA and be connected to a “5V standby” voltage.
Hardware Installation
2.5.6. CD-IN/AUX-IN Connector
Connector: CN21 (CD-IN)/CN45 (AUX-IN)
Type: 4 pin un-housed
This mainboard has one CD-IN connector, AUX-IN connector. The CD-IN con-
nector is used to connect the CD ROM audio out and allows the system to re-
ceive audio input from the CD ROM. The AUX-IN connector allows the system
to receive signals from other audio devices like a radio or tape.
Right Channel
CD-IN / AUX-IN
Left Channel
CD-IN / AUX-IN
Ground
1 Left Channel CD/AUX-IN
2 Ground
3 Ground
4 Right Channel CD/AUX-IN
Top View of a CD/AUX-IN
Connector
Front View of a CD/AUX-IN
Connector
Ground
WOL
5V_SB
Ground
1 5V_SB
2 Ground
3 WOL
Top View of a WOL Connector
Front View of a WOL Connector
2.5.7. Front Audio Connector
Connector: CN39
Type: 10 pin
This connector should be used with the front utility panel. The utility panel was
developed so that the user is able to bring the Hear Phone OUT and MIC-IN
connectors to the front of their PC. This makes things like plugging in speakers
and earphones much less troublesome. Please make sure the Pin 1 location
(diagram on next page).
