www.desatech.com
113470-01D
16
4. Lift rear ends of hearth pan up until front
edge clears lower frame rail then slide
up on end and angle out of fireplace
opening.
5. Remove 4 Phillips screws holding face
extensions at top refractory clips (see
Figure 30).
6. Remove viewing screen from cabinet
face. Viewing screen is attached by mag-
nets (see Figure 31).
Note:
Do not scratch viewing screen. Place
on a nonabrasive surface away from work
area. When replacing viewing screen painted
side must face inside of cabinet with pattern
facing up.
7. Remove 4 Phillips screws on base cover
and lift cover off cabinet base. See Figure
3, page 17.
Note:
Only CE3M series models have Face
Extensions that require removal to access
Imaging Unit. Model CE36M series has in-
ner Face Panels that also require removal to
access Imaging Unit.
MAINTENANCE
Continued
Figure 29 - Accessing Imaging Unit
Refractory
Brackets
Grate
Hearth Pan
Bracket
Hearth Pan
Bracket
Brick Liner
Brick
Liner
Figure 30 - Removing Hearth Pan and
Face Extensions (Extensions for E32
Series Only)
Hearth Pan
Face Extensions
Refractory Clip
Viewing Screen
Figure 31 - Removing Viewing Screen
