44
090430.01
Ultrasonic tank management system
• Delete value 0.0 using the backspace
function (
) and enter the height of the
tank. For example, ‘45’ (cm).
This value must now be saved in the
memory.
• Select Enter (
) and press the
key 1x.
Tank calibration
Tank type
Tank volume
20% tot. depth
40% tot. depth
Tank depth
60% tot. depth
Exit
V-shape
123.0 l
n.a.
n.a.
45.0 cm
n.a.
80% tot. depth
n.a.
• Return to the menu ‘Tank settings’ by
using the
/
keys to navigate
to ‘Exit’ and pressing
.
• Return to the ‘Configuration menu’ by
using the
/
keys to navigate
to ‘Exit’ and pressing
.
• Connect the next sensor; the name of
the sensor that has just been connect-
ed (Vetus) will be displayed after a brief
interval.
Configuration menu
Tank
Drinking water
Display settings
Exit
Vetus
Select the sensor that has just been
connected using the
/
keys
and press
2x. The keyboard and
the name of the tank will then be dis-
played again.
Repeat steps B and C for each following
sensor.
For a tank with an irregular shape the vol-
umes at 20, 40, 60 and 80% tot. height
must be entered after this.
This done in the same way as entering the
tank volume and tank height.
Setting the alarms is described in Chapter
‘Operating’ paragraph 2.4.7.
