Vetus ECGPS, Руководство по эксплуатации и инструкции по установке

Страница: 15 / 80

100506.01
15
ENGLISH
1 Introduction
This manual contains information about
the operation, calibration and installation
of the electronic compass / GPS.
The following information can be read
from the display:
- Heading on analogue heading bar
- Heading, selectable GPS, magnetic,
true or drift, on 7-segment display.
- Messages, selectable time, date, coor-
dinates, etc., on 11 character display
1.1 Package contents
- ECGPS display instrument
- ECGPS compass/GPS sensor with
bracket
- 2 female 6-pole connectors
- 1 female 4-pole connectors
- Mounting seal
- 4 metal rings + M4 nuts
- Drill Template
2 Working
2.1 The display
1 Horizontal analogue heading bar
2 Large heading display
3 Alarm indicator
4 Buttons
5 Magnetic or True North indicator
6 11 character display
2.2 Summary of operating func-
tions
The unit has four control buttons. These
buttons have the following functions:
press the button once or
more times to change the back-
light intensity or when in a menu
this button works as a reset but-
ton.
press the button to access
the menu.
Use
/ keys to choose
one of the menus and press
to enter the menu.
If you press the button for
more than 2 seconds you will exit
the menu.
on/off setting for the ‘off
course alarm’ or when in a menu
it works as a button to select a
menu or messages or to change
settings.
select ‘true’ , ‘mag’ , ‘GPS’ or
‘drift’ or when in a menu it works as
a button to select a menu or mes-
sages or to change settings.
The function of a button is activated when
the button is released, both
and
buttons have an automatic repeat
function. The buttons have a timeout of 1
minute.
2.2.1 Button sound
On the release of a button you will hear a
key sound.
This sound can be switched of in the menu
‘Key Sound’ (C3).
4
6
1
5
2
3
Electronic Compass / GPS ECGPS