Vetter Smartfork Скачать руководство пользователя страница 55

Страница: 55 / 62

NOTICE!
Danger when replacing only one fork arm!

If one fork arm is damaged, it is to be expected that the other arm has, or

will have, the same damage.

–

If one VETTER Smart

Fork

is damaged, always replace the fork

arms in pairs.

6.2.7

Replacing components

NOTICE!

Repairs may only be carried out by the manufacturer or by a specialist

company authorised by the manufacturer. The manufacturer does not

accept any liability for any damage that occurs as a result of improper
repairs or welding work on the VETTER Smart

Fork

fork arms.

Improper repairs or the use of third-party components could lead to

damage and a loss of functionality. Dangerous situations and serious

injuries could result. Improper repairs invalidate the guarantee and the

manufacturer’s responsibility for any consequential damage.

–

Have VETTER Smart

Fork

applications replaced by an electrician

only.

–

Always use original components.

–

Observe the safety information in the relevant separate instructions.

6.2.8

Spare parts

Spare parts for the VETTER Smart

Fork

can be ordered from the manufacturer. If in

doubt, customer service can identify the required spare parts from the order number on

the hard stamping

“Customer service” on page 3

. Always install original components.

The use of third-party components invalidates the guarantee and the manufacturer’s

responsibility for any consequential damage.

Replacing in

pairs

Improper

repairs

Maintenance of the VETTER SmartFork

Maintenance activities > Spare parts

V1.08/2019

SmartFork

- The intelligent SensorFork

Содержание Smartfork































































Результаты поиска

Содержание Smartfork

Отзывы:

Бренды по названию

Популярные бренды

Vetter Smartfork, Руководство по эксплуатации

Результаты поиска

Содержание Smartfork

Отзывы:

Бренды по названию

Популярные бренды