Vetter Smartfork Скачать руководство пользователя страница 42

Страница: 42 / 62

5.5

VETTER SmartFork

Secure

WARNING!
Risk of injury from tipping or slipping load!

Incorrect lifting of loads could cause the load to tip or slip and cause

serious injuries.

Observe the following to ensure reliable functioning of the Smart

Fork

Secure application:

–

Ensure that the sensors on the upper side of the Smart

Fork

Secure

application are never covered and are always kept clean.

–

Ensure that non-reflective materials, e.g. black plastic pallets do not

prevent safe functioning.

–

Ensure that cover foils such as wrap-around or shrink wrap in the

area of the pallet pockets do not disrupt the system and do not pre-

vent safe functioning.

Fig. 24: VETTER SmartFork® Secure

Particularly helpful when lifting loads in block storage or for a load that

must be supported across its entire length.

Switch on the industrial truck. The power to the VETTER Smart

Fork

Secure appli-

cation is supplied by the ignition of the industrial truck.

The VETTER Easy

Secure

LED display is now ready for operation. Other con-

trols are not available.

Pick up the load.

The signal to the VETTER Easy

Secure

LED display shows when the load is

completely picked up and when the fork tip is free again.

Operation of

the loading

function

Operation of the VETTER SmartFork

VETTER SmartFork® Secure

V1.08/2019

SmartFork

- The intelligent SensorFork

Содержание Smartfork































































Результаты поиска

Содержание Smartfork

Отзывы:

Бренды по названию

Популярные бренды

Vetter Smartfork, Руководство по эксплуатации

Результаты поиска

Содержание Smartfork

Отзывы:

Бренды по названию

Популярные бренды