Vetter Smartfork Скачать руководство пользователя страница 46

Страница: 46 / 62

Switch on the industrial truck. The power to the VETTER Smart

Fork

Level applica-

tion is supplied by the ignition of the industrial truck.

The display medium can now be switched on.

Switch on the display medium. Other controls are not available.

The tilt function is now ready for use.

Change the tilt of the fork carriage.

The tilt angle to the vertical is displayed on the display medium.

All settings for the VETTER SmartFork

Level application are in the sup-

plied operating manual for the display medium.

5.9

VETTER SmartFork

Distance

WARNING!
Risk of injury from tipping or slipping load!

Incorrect lifting of loads could cause the load to tip or slip and cause

serious injuries.

For round objects, such as pipes, the reflection of the VETTER
Smart

Fork

Distance application is disrupted. The VETTER Smart

Fork

Distance application cannot be used safely in this circumstance.

Always observe the following:

–

When using only one sensor, do not approach the load at an angle.

Always approach the load head-on and pick up the load with both fork

arms.

–

When two sensors are in use, only the one closest to the object in

front of the fork tips is displayed on the output terminal.

Operation of

the tilt func-

tion

Operation of the VETTER SmartFork

VETTER SmartFork® Distance

V1.08/2019

SmartFork

- The intelligent SensorFork

Содержание Smartfork































































Результаты поиска

Содержание Smartfork

Отзывы:

Бренды по названию

Популярные бренды

Vetter Smartfork, Руководство по эксплуатации

Результаты поиска

Содержание Smartfork

Отзывы:

Бренды по названию

Популярные бренды